Lead selenide PbSe granules
  • Lead selenide PbSe granules
  • Lead selenide PbSe granules

Lead selenide PbSe granules use in thin film coating CAS 12069-00-0

Model No.︰

PbSe

Brand Name︰

TYR

Country of Origin︰

China

Unit Price︰

US $ 200 / pc

Minimum Order︰

1 pc

Share on:

Product Description

 Lead Selenide (PbSe) granules

Purity: 99.99%, 99.999%

Shape: shots,pellets,pieces,granules,rods,tablets

Spec.:

Tablets: 8mm dia. X 5mm L, 10mm dia. X 5mm L, 20mm dia. X 8mm L e.t.c

Pieces, Granules: 1-2.5mm, 3-6mm, 3-8mm, 1-3mm, 3-12mm e.t.c

 

Made sputtering targets method: hot pressing (HP), hot/cold isostatic pressing (HIP, CIP), and vacuum melting, vacuum sintering

 

Lead selenide (PbSe) is a semiconductor material. It forms cubic crystals of the NaCl structure; it has a direct bandgap of 0.27 eV at room temperature. (Note that incorrectly identifies PbSe and other IV–VI semiconductors as indirect gap materials.)  It is a grey crystalline solid material.
It is used for manufacture of infrared detectors for thermal imaging,operating at wavelengths between 1.5–5.2 µm. It does not require cooling, but performs better at lower temperatures. The peak sensitivity depends on temperature and varies between 3.7–4.7 µm.
Single crystal nanorods and polycrystalline nanotubes of lead selenide have been synthesized via controlled organism membranes. The diameter of the nanorods were approx. 45 nm and their length was up to 1100 nm, for nanotubes the diameter was 50 nm and the length up to 2000 nm.
Lead selenide nanocrystals embedded into various materials can be used as quantum dots, for example in nanocrystal solar cells.
Lead selenide is a thermoelectric material. The material was identified as a potential high temperature thermoelectric with sodium or chlorine doping by Alekseva and co-workers at the A.F. Ioffe Institute in Russia. Subsequent theoretical work at Oak Ridge National Laboratory, USA predicted that its p-type performance could equal or exceed that of the sister compound, lead telluride.Several groups have since reported thermoelectric figures of merit exceeding unity, which is the characteristic of a high performance thermoelectric.
The mineral clausthalite is a naturally occurring lead selenide.
It may be formed by direct reaction between its constituent elements (lead and selenium).

Molar mass: 286.16 g/mol                                              Melting point: 1,078 °C (1,972 °F; 1,351 K)

 

Main Applications of the PbSe Detectors:

1. Industrial:
Gas analysis
Flame analysis
Infrared spectroscopy
2. Industrial process and quality control:
Glass
Plastic
Petrochemical
Automotive
Railway
Coal
Steel
3. Hot spot detection
4. High speed infrared imaging:
Turbo jet combustion
Electrical failures
Welding (laser, arc, etc.)
Spot laser characterization
Waste sorting
Food industry
5. Fire detection
6. Environmental control
7. Defense
Passive Infrared Cueing Systems
Active protection systems
Low cost seekers
Proximity fuzes
Sniper detection
Sensor Fuzed Weapons
DIRCM

 

We also supply below Selenide Ceramic sputtering target   

Aluminum Selenide , Al2Se3 target       

Antimony Selenide , Sb2Se3 target       

Arsenic Selenide , As2Se3 target       

Bismuth Selenide,  Bi2Se3 target       

Cadmium Selenide , CdSe target       

Copper Selenide, CuSe, Cu2Se target       

Gallium Selenide, Ga2Se3 target       

Gernium Selenide, GeSe  target       

Indium Selenide, In2Se3 target       

Lead Selenide, PbSe target       

Molybdenum Selenide, MoSe2 target       

Manganese Selenide, MnSe target       

Niobium Selenide , NbSe2 target       

Tantalum Selenide , TaSe2 target       

Tungsten Selenide , WSe2 target       

Zinc Selenide , ZnSe target   

 



Label︰ Lead selenide PbSe granules

Product Image

Lead selenide PbSe granulesLead selenide PbSe granules

Lead selenide PbSe granulesLead selenide PbSe granules

offering sputtering targets, evaporation material, rare earth metal, rare earth oxide, chemistry reagent

 

Powered by DIYTrade.com